Your Position: Home > FPV RACER> FPV Racer
  • Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF
  • Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF
  • Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF
  • Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF
  • Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF
Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF
Larger view
Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF
Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF

Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL w/ iRangeX iRX-i6X RTF

US$329.99 US$399.99
Product Specification:
Motor :MN2206 2300KV
ESC :30A BLHELI_S 4 in 1 ESC
Camera :800TVL
Transmitter :5.8G 72CH 25MW 200mw 600MW switchable transmitter
Flight Controller :BF3.1.5 Omnibus F4 V2
Receiver :iRangeX iR-A8S receiver
Battery :1500mAH 4S 14.8V
Propeller :5051 3-blade propeller

Attention:

Before December 2017, Eachine Wizard X220S come with iRangeX iRX-i6X remote control and iR-A8S receiver, after that it will come with Flysky FS-i6X remote control and FS-A8S receiver.
Both of the iRX-i6X and FS-i6X are compatible with iR-A8S and FS-A8S.

 

Description:

Item Specification
Eachine Wizard  X220S
Wheelbase: 220mm
Frame arm: 4mm light material 
Weigh: 356g (without battery and camera mount)
Take off weigh: 561g
Package weigh: 1728g
Use light composite material.
4mm thickness and 15mm width frame arms, the width is 5mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session. 
Anti-vibration sponges to protect the racer frome crashing.

Eachine  MN2206 2300KV motor

KV: 2300
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 3MM
Propeller: 5 inch
Weight: 28g
 
Eachine 30A BLHELI_S  4 in 1 ESC
Con. current: 30A
Peak current (10S): 35A
Input  voltage: 2-5S
BEC: No
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM

Eachine 1179 800TVL CCD camera 
Color: purple
Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980H×1080 (2MP) NTSC: 1980H×1080V (2MP)
Format: PAL/NTSC switchable 
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
AWB: ON/OFF
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lens 
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20℃--60℃
Humidity: 0%~98% 
Strong backlighting effect

5.8G 72CH 25MW 200mw 600MW
switchable transmitter

Video Format  : NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85℃
Connector: SMA Female (Inner hole)
Antenna Connector:  RP-SMA male (Inner needle)



BF3.1.5 Omnibus F4 V2 flight controller
Size: 35x35mm
Mounting hole: 30.5x30.5mm
Firmware: betaflight_3.1.5_OMNIBUSF4SD
Input voltage: 2-6S
SCM: STM32 F405 MCU
Sensor: SPI Sensor MPU6000
Berometer: BMP280
Slot: standard SD card slot 
BEC: 5V/3A
STM32 F405 MCU, Runs betaflight_3.1.5_OMNIBUSF4SD, could run faster loop time. 
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI. 
Built-in 5V/3A BEC.
Built-in galvanometer.
With LC filter.

iRangeX iRX-i6X 2.4GHz 10CH remote control

Channel: 6-10 (Default 6)
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.408-2.475GHz
RF Power: < 20dBm
RF Channel: 135
Bandwidth: 500KHz
2.4GHz System: AFHDS 2A / AFDHS
Modulation Type: GFSK
Stick Resolution 4096
Low Voltage Warning: < 4.2V
DSC port: PS/2 Port PPM
Chargeable: No
Antenna Length: 26mm (Dual Antenna)
Weight: 392g
Power: 6V DC 1.5AA*4
Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight
Size: 174x89x190mm
On-line Update: Yes
Color: Black
Certificate: CE0678, FCC ID: N4ZFLYSKYI6X
 
iRangeX iR-A8S receiver

Channels: PPM 8CH
Model type: Multi-rotor
Frequency range: 2.408-2.475GHz
Band width: 500KHz
Band number: 135
RX Sensitivity: -92 dBm
2.4GHz system: AFHDS 2A
Modulation type: GFSK
DSC port: PPM
Transfer method: FHSS
Data output: 1.5mm*3 Pin  PPM
Antenna length: 26mm (Not including brass contacts)
Input power supply: 4.0-8.4V
Display method: LED
No ground interference ( Transmitting and receiving 1 m from the ground): >300m
Working current: 40mA
Each channel data: depend on the transmitter
Channel delay: <15mS
Size: 20*14*5.3mm
Weight: 1.2g
Certificate: CE0678, FCCID: N45ZA8S00
 
1500mAH 4S 14.8V 75C battery

Capacity(mAh) : 1500
Cells (s): 4
Weight (g): 177
Length(mm): 80
Width(mm): 30
Height(mm): 33
Connector: XT60

Eachine 5051 3-blade propeller
Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm


Package included:

1 x Eachine Wizard X220S frame kit
1 x iRangeX iRX-i6X remote control
1 x iRangeX iR-A8S receiver
2 x 2206 2300KV motor CW 
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S  4 in 1 ESC
1 x BF3.1.5 Omnibus F4 V2 flight controller
1 x 800TVL camera 
1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 x 1500mAH 4S 14.8V 75C battery
1 x 30° Camera Mount(For Runcam3/Gopro session)
1 x B3 Pro charger
1 x Pagoda antenna
2 x Battery strap
2 x Wrench
(Package doesn't include Runcam 3, the Runcam 3 on the pictures for reference only.)
FAQ

There are 5V and 12V on the PCB, but i don\'t know how to get them.

Hello, X220S PCB doesn\'t have BEC. There is a story... In beginning, this PCB has BEC cell, but we thought it just only power for the LED, so we decided to remove BEC on the PCB, but our SMD factory didn\'t get our meaning, so there are some marks on the board, in fact, this pcb doesn\'t have BEC. Surely, if needed, you can also put BEC on the pcb board.:)

x
Customer Reviews
Average rating: 5.0 (52 reviews)
By Amazon Customer 18-04-17
Very fun to fly!
This is my first FPV quad.This is a very outstanding quality quad.I’m so excited to fly the EACHIN X220S quad.This very tough race drone crashed hard a lot with no major issues and the transmitter is awesome.
Comments(0)

By Madison Hughes 18-03-20
Great learner drone
The race drone is the best for stunt flying.It is very fast and very strong frame.Setup is fairly easy for me and I installed an upgraded camera and VTX.This is a great learner drone I recommend this absolutely.
Comments(0)

By Anthony Pirozzi 18-03-06
Great starter drone
This beast is truly impressive.The EACHINE Wizard X220S is a HUGE upgrade over the Wizard X220.Firstly,the drone is super fast,agile,and precise,but also can be handed very smooth and solid.The video quality of the camera is better than I expected.The top RTF bundle --beta flight already set up,just need to active some modes and sensors,load the battery.If you’re a FPV RACE Beginner,this is probably the best value quadcopter you can get.The quad is great starter drone.
Comments(0)

By Amazon Customer 18-03-04
i like it.
need a mini usb cable to get it ready to fly... no big deal... i like it..
Comments(0)

By Patricia Graff-Garvin 18-02-28
Amazing quad!!!
I configured it for a maiden flight.Very responsive quadcopter.I had three light crashes during flight and they may break...But no problem with the legs now(full carbon fiber).I am loving everything l got super nice gear,the quadcopter is amazing and the radio is awesome.Highly recommend this kit!!
Comments(0)

Write a review for this product

  • Rating: *
  • Title:*
  • Review:*
  • Sign in/Create Your Account
  • Picture:
    Max 2 images, 2MB per image,Format: jpeg/jpg/gif/png/bmp
  • Video:
    Share a video with your review, please make sure your video is related to the product

Tips for writing reviews

Be detailed and specific. What would you have wanted to know before your purchased the product? Aim for clear and concise language.
The following content is not allowed in product reviews: Objectionable material:
  • • Obscene or distasteful content (e.g. pornography)
  • • Profanity or spiteful remarks
  • • Promotion of illegal or immoral conduct
Guidelines for Uploading Photos or Vedios: Please upload real photos or videos you took for the product. Any photos or videos with eroticism, bloodiness, or violating any copyright are strictly forbidden and will be deleted immediately.